Product Introduction
A10Ex, specially designed solvent recycler for small amount of organic solvent recovery. Tilting-type and air-cooled condensing system, safe structure are manufactured by Chinese explosion-proof standard (CNEX: Ex d IIB T2 Gb, certificate No. CNEx16.2108X) and European standard (ATEX). After distilling and cooling for proximate 1.5 hours, clean organic solvents will be ready for reuse.
A10Ex solvent cleaning machine is suitable for small amount of organic solvent to recycle. It can handle 100L waste solvents by running 24 hours daily.
Product Photos
Detailed images
Technical data
Imput volume |
10 L |
Length |
655 mm |
Capacity of Tank |
15 L |
Width |
505 mm |
Capacity of heat transfer oil |
5.5 L |
Height |
1050 mm |
Power of heater |
2.0 KW |
Weight |
62 KG |
Power of fan |
0.09 KW |
Temp. of operation |
50~190 °C |
Max power |
2.2 KW |
Ideal room temp. |
5~30 °C |
Max current |
9.5 A |
Noise |
around 65 db |
Power supply |
220V AC/50 HZ |
Voltage of control unit |
24V DC |
Heating method |
Indirect heating by heat transfer oil |
Cycle time |
around 1.5 Hours |
Recovery rate |
95% |
Cooling system |
Air-cooled |
Solvent imput |
Manual ( automatic imput unit is addable) |
Material of case |
Carbon steel with paint |
Vacuum unit |
None(option addable) |
Material of tank |
SUS304, double layers |
NOTE: Values listed above are under ideal conditions in laboratory, just for your reference. The realistic data will be a little deviation due to the difference of waste content, boiling point of solvent, room temperature, viscosity etc.
Recoverable solvents list by solvent recycling equipment
8 benefits of solvent distillation machine
Main Features of solvent distillation unit
Packing and Delivery
Packing
1. Seaworthy standard wooden box.
Delivery
1. 5 days after payment if equipment in stock, or 30 days after payment if equipment customized.
Company profile
Certifications
Our clients
FAQ
1. Could you prove that you are a factory?
You could go through our website ‘www.solventrecyclingsystem.com’ to check our business registration and certificates.
2. Is there any consumables for your machines?
Yes, there are three consumables, thermal oil and seal-rings.
3. Can you build a machine without any information of your company?
Yes, we can build non-logo machines without any extra charges.
4. How long has you company been qualified by CE?
Our machines are in compliance with CE certificate for more than 20 years.
5. Could you specify T/T payment?
Usually 50% down payment and 50% balance payment before machine’s shipping.
http://www.solventrecyclingsystem.com/